WEH® Connector TW108
The WEH® TW108 Connector for filling and evacuating of refrigerants during maintenance of automotive air conditioning equipment was designed as reasonably priced alternative to the WEH® TW110. By simple push & pull actuation, the leak-tight connection to the external diameter Ø 11 or Ø 13 of beads is established in just seconds.
The TW108 service connector is rated for a max. operating pressure of 510 psi and equipped with a colour coded sliding sleeve in red or blue for the vehicle’s high pressure respectively low pressure connection port.
The TW108 filling connector has an integrated shut-off valve reducing the release of polluting refrigerants to a minimum. Thanks to the high operating convenience offered by the sliding sleeve, tedious hand tightening causing RSI is a thing of the past. Thus workflows are significantly simplified and considerable time and cost savings are achieved.
| Max. allowable operating pressure PS | 510 psi (35 bar) |
|---|---|
| Temperature range | +14 °F up to +176 °F |
| Connection A | Ø 11 |
| Media inlet B1 | UNF 7/16"-20 male thread |
| Leak rate | 1 x 10-3 mbar x l/s |
| Actuation | Manual actuation via sliding sleeve |
| Design | With integrated shut-off valve |
| Material | Brass and anodized aluminium |
| Sealing material | Front seal of HNBR |
- Connection in seconds
- High-grade materials
- No hand tightening required
- Reduces connection times and costs
- Versions for high or low pressure connection ports available
- WEH® Jaw Locking Mechanism
| Description | Document type | Language | File type | File size |
|---|
