WEH® Coalescing Filter TSF2 H₂
For installation in H2 fueling stations
Part no.
C1-181949
€0.00
Clean, filtered gases are essential to guarantee the proper function of components for vehicles and filling stations when refueling with hydrogen. The WEH® TSF2 H₂ coalescing filter was developed to remove particles from the gas flow.
When filtering the gas flow, the TSF2 H₂ reliably removes contaminants such as oil, water and dirt particles which are contained in the gas. This contamination is isolated by the coalescing filter. Hydrogen flows through the filter, whereas contaminants such as oil, water and other aerosols coalesce, and drop into the sump of the filter, where they are separated into a drain port.
The WEH® TSF2 H2 is easy to maintain and can be installed onboard vehicles and in fueling stations at any time.
| Nominal bore (DN) | 10 mm |
|---|---|
| Operating Pressure | PS = 490 bar |
| Nominal Pressure PN | 35 MPa |
| Temperature Range | -40 °C up to +85 °C |
| Media Inlet | UNF 9/16"-18 female thread, SAE J1926-1 |
| Filter Material | < 1 μm |
| Design | Incl. plug |
| Material | Corrosion resistant stainless steel |
| Sealing Material | Hydrogen resistant |
| Approval | e1 00 0010 (Regulation (EC) No. 79/2009) |
- Ease of maintenance
- Fine filter with high particle retention capacity (efficiency of approx. 99.9 % > 0.3 μm)
- Protection of critical components in the fuel system
- Wear and corrosion resistant
| Description | Document type | Language | File type | File size |
|---|
