WEH® Connector TW850-S50 H2
The WEH® TW850-S50 H2 Quick Connector reduces testing times and improves productivity on the test bench.
WEH® Jaw technology ensures quick, tool-free connection and disconnection and offers a cost-effective alternative to
H2 fueling nozzles when only a leak test is required and no refuelling is needed.
The S50 variant was developed specifically for connection to hydrogen receptacles and has been tried and tested in
practice for many years, including in use at WEH for end-of-line testing.
The jaws on the TW850-S50 are designed for coded receptacles. The connection profile for the media inlet (B1) can be
designed to your specifications on request
| Temperature Range | -40 °C up to +85 °C |
|---|---|
| Medium | Hydrogen |
| Leak Rate | 1 x 10-3 mbar x l/s, measured with 100 |
| Actuation | Manual actuation via sliding sleeve |
| Material | Corrosion resistant |
| Sealing Material | NBR |
- Can be connected to receptacle coded in accordance with ISO 17268-1
- For pressure and leak tests on H2-systems
- Optimized for hydrogen applications with high operating pressures
Test connector for quick and secure connection to H2-receptacles for carrying out pressure and leak tests.
Note: The connector is not designed for fueling H2 vehicles.
The media flow must be blocked off using a separate valve, there is no check valve in the TW850-S50 H2.
| Description | Document type | Language | File type | File size |
|---|
